2.83" 240x320TFT LCD Display501XLXRYUYD>NAME>VALUESuggested Cutout ZoneCourtesy: Adafruit Industries>NAME>VALUE<b>Solder Jumper</b> - Reflow>NAME>VALUE<b>Solder Jumper</b> - Wave>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE0603-Mini
<p>Mini footprint for dense boards</p>>NAME>VALUE>NAME>VALUE<b> 0402</b>>NAME>VALUE<b>0402 MicroPitch<p>>NAME>VALUE<b>0603</b>>NAME>VALUE<b>0603 MicroPitch</b>>NAME>VALUE<b>0805</b>>NAME>VALUE<b>0805 MicroPitch</b>>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>RESISTOR 2512 (Metric 6432)</b>>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE>VALUEBUS SELRSTTOUCHBACKLIGHTPOWERSERIAL LOGICRGBDATA BUS>NAME>VALUESD & MMC>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE<b>GND</b><b>MicroSD/Transflash Card Holder with SPI pinout</b>
<p>3M: 2908-05WB-MG<br/>4UConnector: 19656</p>
<p>Footprint courtesy: Adafruit Industries</p><p><b>SMD Solder JUMPER</b></p>
<p>Solder the two pads together to create a connection, or remove the solder to break it.</p>
<b>REFLOW</b> - Use this footprint for solder paste and reflow ovens.<br/>
<b>WAVE</b> - Use this footprint for hand-soldering (larger pads).
<p><b>CLOSED</b> - Has a trace between the two pads to ensure it is closed by default. The trace needs to be cut to disable the jumper, and can be closed again by creating a solder bridge between the two pads.</p><p><b>Ceramic Capacitors</b></p>
<p>For new designs, use the packages preceded by an '_' character since they are more reliable:</p>
<p>The following footprints should be used on most boards:</p>
<ul>
<li><b>_0402</b> - Standard footprint for regular board layouts</li>
<li><b>_0603</b> - Standard footprint for regular board layouts</li>
<li><b>_0805</b> - Standard footprint for regular board layouts</li>
<li><b>_1206</b> - Standard footprint for regular board layouts</li>
</ul>
<p>For extremely tight-pitch boards where space is at a premium, the following 'micro-pitch' footprints can be used (smaller pads, no silkscreen outline, etc.):</p>
<ul>
<li><b>_0402MP</b> - Micro-pitch footprint for very dense/compact boards</li>
<li><b>_0603MP</b> - Micro-pitch footprint for very dense/compact boards</li>
<li><b>_0805MP</b> - Micro-pitch footprint for very dense/compact boards</li>
<li><b>_1206MP</b> - Micro-pitch footprint for very dense/compact boards</li>
</ul><p><b>Resistors</b></p>
<p>For new designs, use the packages preceded by an '_' character since they are more reliable:</p>
<p>The following footprints should be used on most boards:</p>
<ul>
<li><b>_0402</b> - Standard footprint for regular board layouts</li>
<li><b>_0603</b> - Standard footprint for regular board layouts</li>
<li><b>_0805</b> - Standard footprint for regular board layouts</li>
<li><b>_1206</b> - Standard footprint for regular board layouts</li>
</ul>
<p>For extremely tight-pitch boards where space is at a premium, the following 'micro-pitch' footprints can be used (smaller pads, no silkscreen outline, etc.):</p>
<ul>
<li><b>_0402MP</b> - Micro-pitch footprint for very dense/compact boards</li>
<li><b>_0603MP</b> - Micro-pitch footprint for very dense/compact boards</li>
<li><b>_0805MP</b> - Micro-pitch footprint for very dense/compact boards</li>
<li><b>_1206MP</b> - Micro-pitch footprint for very dense/compact boards</li>
</ul><b>TO-3</b>>NAME>VALUECEB<b>TO 18</b>>NAME>VALUE123<b>TO-18</b>>NAME>VALUE123<b>TO 202 horizontal</b>>NAME>VALUE123<b>TO 202 vertical</b>>NAME>VALUE123SOT-93<p>
grid 5.45 mm>NAME>VALUEA20,3mmSOT-93<p>
grid 5.45 mm>VALUE>NAME<b>TO 126 horizontal</b>>NAME>VALUE123<b>TO 126 vertical</b>>NAME>VALUE123<b>TO 218 horizontal</b>>NAME>VALUE123<b>TO 218 vertical</b>>NAME>VALUE123<b>TO 220 horizontal</b>>NAME>VALUEA17,5mm123<b>TO 220 vertical</b>>NAME>VALUE<b>TO-225</b><p>
grid 2.54 mm, vertical123>NAME>VALUE<b>TO-39</b>>NAME>VALUE<b>TO 5</b>>NAME>VALUE<b>TO-66</b>3>NAME>VALUE21<b>TO 92</b>>NAME>VALUE231<b>TO-92</b> Pads In Line E B C from top<p>>NAME>VALUE<b>TO-92</b> Pads Triangle Reverse>NAME>VALUE<b>TO-92</b><p>
grid 5.08 mm>NAME>VALUE<b>TOP 3 horizontal</b>>NAME>VALUEA20,3mm123<b>TOP 3 vertical</b>>NAME>VALUEBCETO-236 ITT Intermetall>NAME>VALUE<b>SOT-23 (EBC)</b>>NAME>VALUE<b>TO-92</b> Pads In Line B C E from top<p>>NAME>VALUE<b>TO-92</b> Pads In Line C B E from top<p>>NAME>VALUE<b>TO-92</b> Pads In Line B E C from top<p>>NAME>VALUE<b>TO-92</b> Pads In Line C E B from top<p>>NAME>VALUESC59 (SOT23) Motorola>NAME>VALUESOT98 Basis Collector Emitter>NAME>VALUE<b>SOT-37</b><p>
Motorola CASE 317A-01 ISSUE B<br>
http://www.ee.siue.edu/~alozows/library/datasheets/BFR96.pdf>NAME>VALUEEBC5,1<b>TO-92</b> Pads In Line E C B from top<p>>NAME>VALUE<b>Small Outline Transistor</b>3412>NAME>VALUE>NAME>VALUENPN Transistror>VALUE<b>SUPPLY SYMBOL</b>>VALUE<b>SUPPLY SYMBOL</b><b>Small Outline Transistor</b><p>
package type OT>NAME>VALUE>NAMELP298X<a href="https://www.digikey.com/product-detail/en/bourns-inc/7914G-1-000E/7914G-000EDKR-ND/741386">7914G-1-000E</a>: Momentary Button<b>Small Outline Transistor</b>>NAME>VALUE>NAME>VALUE>NAME>VALUE>NAME>VALUE<a href="https://www.digikey.com/products/en/rf-if-and-rfid/rf-transceiver-modules/872?k=wroom+32&k=&pkeyword=wroom+32&sv=0&v=1528&sf=1&FV=fffc05f8%2Cfffc0770%2C1f140000%2Cffe00368%2Cf60450e%2Cf604b7b%2Cf604b7c&quantity=&ColumnSort=0&page=1&stock=1&pageSize=25">WROOM-32</a>: ESP32 Module<a href="https://www.digikey.com/products/en?keywords=952-3236-ND">M20-8890845</a>: Horizontal Male SMD Headers
<br><br>
<a href="https://www.digikey.com/product-detail/en/harwin-inc/M20-7910842R/952-3200-6-ND/6559341">M20-7910842R</a>: Horizontal Female SMD Headers<a href="https://www.digikey.com/product-detail/en/bourns-inc/7914G-1-000E/7914G-000EDKR-ND/741386">7914G-1-000E</a>: Momentary Button<a href="https://www.digikey.com/product-detail/en/maxlinear-inc/SPX3819M5-L-5-0-TR/1016-1874-6-ND/3586704">SPX3819M5-L-5-0/TR</a>: 5.0V/0.5A SMD Linear Regulator
<br><br>
<a href="https://www.digikey.com/product-detail/en/maxlinear-inc/SPX3819M5-L-3-3-TR/1016-1873-6-ND/3586703">SPX3819M5-L-3-3/TR </a>: 3.3V/0.5A SMD Linear Regulator>NAME>VALUEUSB AB, 5-pins: USBVCC, GND, D+, D-, USBID.USBABThis is a USB AB connector that is compatible with USB OTG. i.e. this connector can serve as a host or device<b>Supply Symbols</b><p>
GND, VCC, 0V, +5V, -5V, etc.<p>
Please keep in mind, that these devices are necessary for the
automatic wiring of the supply signals.<p>
The pin name defined in the symbol is identical to the net which is to be wired automatically.<p>
In this library the device names are the same as the pin names of the symbols, therefore the correct signal names appear next to the supply symbols in the schematic.<p>
<author>Created by librarian@cadsoft.de</author>>VALUE<b>SUPPLY SYMBOL</b><b>Frames for Sheet and Layout</b>12345678910111213141516LKIHGFEDCBA16151413121110987654321ABCDEFGHIKLRevÄnderungs-Nr.TagNameBearb.Gepr.TagNameBenennungZeichnungs-Nr.>DRAWING_NAMEzu Gerätzu Anlage>SHEET>LAST_DATE_TIMEBlatt<b>FRAME</b><p>
419 x 297 mm, landscape
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.